Small old water tower

 This old style wooden water tower is for being located next to a structure.  The figure was included to give an idea of the size.  There is a small roof hatch at the top of the ladder.

The figure is holding a lantern.

The tower tank was built by glueing vertical boards to a section of thick dowel.  

Old shack model

I like building small models and especially those well weathered.  This model has a board by board exterior with a lot of exterior details.

Above is a rear view showing the shack at the back.  The main roof is tar paper style and the shed roof is corrugated metal.  This side details include short ladder, some shelves with various detail parts, and a pile of wood with an axe on top.

  

Above is a front view with the same side.   There are two figures in the front one lying down on the porch.

  

Above is a view of the other side.  The details on this side include some barrels, a hand cart, a wheel barrow with some tools on it and an old tire.  The cart and wheel barrow are scratch built.  Now I need to decide what to build next.   

 

Old brewery model

It has been a while since I posted anything.  This brewery model was complex due to the internal details and I had other issues that took my time.  The interior details are just things I built that seemed to me to look like what an old brewery would have.

 The photo above shows 3 buildings.  The one on the left is where the beer is brewed.  The one in the middle has large barrels where the beer is stored.   The one on the right is the office.     

  

Above is view of the brew house with the roof removed.  

Above is a view from above showing the interior of the brew house with the roof removed.  

Above is a view of the beer storage building before the roof was installed.  

The construction of this model was interesting.  

Small house with car port

 This small old house has a car port and a rear shed.  On the car port is a removable car, a trash can, an old tire, some shelves with stuff on them and a figure of an old guy who lives in the house.  

Above is the front of the building and there is a car in the car port.

With the car removed you can see the details.

Above is a view of the rear with the shed and the other side of the house. The stack was made using a section of plastic sprue.  

Barn model with cows and pigs

 This barn has cows and pigs in the fencing outside the barn.  Then only commercial parts to the barn are the siding and the tar paper on the roof.  There is very little details inside the barn as they would be difficult to see but I did put some hay bales in the upper floor of the barn which has an inside ladder to climb to the upper floor.  There is a lift at he upper front opening to lift or lower hay bales. 

Above is a front view of the barn.  There is a water bin on the left side of the door and an open hay bale on the right side with a cow eating the hay.  There are two figures which are workers.  The front fenced area is for the cows.  On the right side in the back is the fenced are for the pigs.  

The photo above shows the two fenced areas.  Most of the fences are commercial plastic products.  

Above is a view of the pig area.  The pigs also have a small water bin and a tray of corn for them to eat.  

Above is another view of the cow area and the left side of the barn.

It took a long time to build this and I was also busy doing my least favorite task - taxes.

Small restaurant model

 I had the sign and it was my inspiration to build this model.  The windows and front door are commercial parts.

The only interior detail is a figure sitting at a table at the window with a beer bottle in his hand.

The rear and side view above show the stove pipe, rear door and a wood storage box to fuel the stove inside.

Hoisting machinery maintenance shop

 I am finally posting this model I finished over a week ago.  The delay was due to problems with my computer.  All the windows and doors are scratch built and the details in the shop shed are mostly made up with scraps I had.

You  can see the workman in the shed above.

The roof has commercial shingles.  

Above is a view inside the shed from the side attached to the building and was taken before it was attached.  One of the machines inside was made from an old model locomotive motor.  The barrels are rubber pencil erasers.  As usual it is hard to see interior details but I like making the anyway.