Carpenter shop completion

I have made various modifications to the carpenter shop and yard area, as well as adding more scenery.  All details have also been glued in place.

This carpenter shop project was fun  and I think it turned out well.  Sometimes small projects are more interesting than large industries.

I rearranged the details and added sawdust under the saw horses.  I also added two figures.  The scrap pile at the back between the structures has been expanded.

Above is a higher level view.

Next project

My next project will be a scrap yard.  It will fill a bare area in the middle of the layout area.

Carpenter shop on the layout

The carpenter shop is now installed on the layout.  The details are not glued down as I want to think about their positioning for a while - I may decide to move some things around.  The first photo below shows a number of the details I have either scratch built or in the case of commercial parts, painted them.

The two wheel cart is scratch built as are the chair, bench, work bench, saw horses and the strange machine in the center (that machine is being repaired by the carpenter).  The tool box, grinding wheel and about half of the tools are commercial parts.  The barrels are all commercial parts.

The shop is close to the edge of the layout - you can see the layout edge at the bottom left.  I still need to add scenery around the complex.  The platform with the ice cream shop is across the tracks on the right.  Not much scenery yet in the background area.

Above is a view of mostly the yard area.  The tool box is sitting on the bench.

This was an interesting and fairly simple construction project.  Almost everything I build is subject to later changes - in this case mostly the fence and yard area.  The fence is board by board.

Carpenter shop work shed

This work shed will be installed to the right-rear of the carpenter shop.  It is built using capped siding and the roof is made the same way as the carpenter shop using Campbell shingles.

This front view shows the work bench at the back wall of the shed.  There is an enclosed room for supplies at the left with a door inside the shed.  

Above is a view slightly from the right side.  There are a few boards leaning against the wall.  You can also see a figure standing at the workbench.  

And above is a view slightly from the left side.  Inside you can see some shelving against the right wall.

The remaining work on this model complex includes a board fence around the work yard to the right of the carpenter shop with the shed forming the right rear of the fence.  Then inside the yard will be some equipment and work in progress.  The next posting will show this model complex installed on the layout. 

Carpenter shop model main building complete

The main building of the carpenter shop is complete.  The roof was again made using the old reliable Campbell shingles (I have a fairly large supply of these).  I painted the shingles brown with acrylic paint then dusted them with gray chalk dust.  The stack is a plastic part from my scrap box.

It is difficult to see the details in the shop on the right side but they are partially visible when looking at the model closely - maybe another case of invisible detail.

You can barely see a sawhorse inside the side door.  I did some weathering around the base of the building.

This shows a view of the back of the building, which will be very hard to see as it faces away from the edge of the layout.

And this view shows the right side.

There will be a work shed at the back of this building on the right side and there will be a fence around the right side area.  I plan to put various details inside the fenced area.

Carpenter shop model start

The carpenter shop now has four walls (no roof yet as well as some other details to be completed).  I will be adding details inside the shop area on the right side so no roof until then.  I did but in a basic shop floor made from part of an index card.  That way I can add the details before placing it on the layout.  There will be no light inside but there are two doors so some amount of detail should be visible, and the shop will be next to the edge of the layout.

The porch is for entrance into the living quarters.

The side and rear off the shop area have vertical board siding instead of the clapboard on the rest of the structure.

Above are some of the detail items I have built, most of which will be located inside of the shop area.   All are scratch built.  The work bench is from wood pieces with stuff on it, including a scratch built wood plane on the right side of the bench top.  The trash can was made from a soda straw section with a paper base, and wood pieces inside.  The shelving was made from card stock and craft paper, with lots of junk on the shelves and top.  At the right are two scratch built saw horses.

There will be a fenced in area to the right of the structure and a shed in the yard area.  I am still thinking about what I will do.

Transfer company truck

I modified a Wheel Works cast metal logging truck kit to a transfer company moving truck to be placed at the Peekup and Dropove company loading dock.  The back of the truck was made with a wood frame and a printed siding.

This was a fairly simple build though the kit instructions are very simplistic and lacking in detail.

New Structure

While I was constructing the truck, I sketched out a structure model for a carpenter shop.  My inspiration for this structure was an old photo in a relatively new book.  The structure was vintage 1890's and not a carpenter shop.  The person who started the carpentry business used to work at the wheel company which is located somewhat behind the carpentry shop.  Since the wheel works business was declining, the idea of going into the carpentry business seemed like a good idea.  I am in the early stages of construction.

The structure is part home and part business.  The home is on the left and the business on the right.  This structure is made from card stock with a bracing of wood pieces.  There will be a stone foundation on the left side with a porch in the front.  The clapboard is made with strips of craft paper painted with white acrylic paint.  I like the somewhat non-uniform look of the individual clapboard strips.

Above is the left side and rear walls.  All windows except the rear window are Tichy products.  The rear window is made from wood strips.

More later.

Cleveland Tractor

The Cleveland Tractor company was established in 1916 and eventually ceased production in 1966.  Their product shown here was designed for hauling industrial products.  They were quite flexible in their use.  The photo below shows a small track operated flat car being hauled or pushed outside of an industrial warehouse.  The tractor is 52 inches high and 50 inches high.  It is 96 inched long.

The photo is approximately from the early 1920's.   The load is mixed but appears to be mostly wood barrels.  Below is a diagram photo.

This would make an interesting model - does not appear that it would be too hard to build.

I am currently building a Wheel Works cast metal truck kit with modifications.  More on this later.

I have also decided my next structure build will be a small carpentry shop.  I have sketched it out and started construction.